Oak Park New Construction Under a Concrete Tile Roof
New Construction in Oak Park under a concrete tile roof: trusses figured for its weight, eaves and ridges closed to embers, and Ventura County plan review.
Concrete roof tile for a new Oak Park house is a framing decision as much as a roofing one, because the trusses have to be engineered for its dead load from the first calculation. The return is a Class A covering that keeps its color and shape under hard sun and needs little upkeep. On an Oak Park parcel inside the state's fire hazard maps, that rating is required.
Underlayment, battens and the eave closure
Tile sheds the bulk of the rain, and the membrane under it catches what blows past. A heavy underlayment covers the deck, with self-adhered sheet in the valleys and along the eaves, and battens lift the tiles so water slipping beneath them drains down to the gutter line. Profiled tile leaves hollows at the eave, and a bird stop closes them against nests and embers alike. Hips and ridges are set on a vented ridge system, and on a mapped parcel that system carries an ember listing.
County review and the structure below
Oak Park is unincorporated, so Ventura County's building and safety division checks the plans, and the Ventura County Fire Department looks at access, water and brush clearance on a mapped lot. The truss manufacturer designs for the tile's dead load, and the structural engineer follows that load through headers, walls and footings. Tile is lifted only after the roof nailing passes inspection, and it is spread in small stacks across each slope, so no single bay of framing carries a whole pallet.
About our new construction workEverything we build in Oak Park
New Construction in Oak Park: questions
Ventura County will expect a licensed boundary map with contours, plus a geotechnical investigation with test borings. Two more items deserve a place on the first sheet. The parcel's fire hazard status sets the roof, siding and vents, and the roof covering itself sets the truss loads, so both are fixed before engineering starts.
Tile goes up by a conveyor or boom mounted on the delivery truck, which has to park on firm ground close to the eaves. When it can, pallets are lifted straight to the roof in a day. When it cannot, a ladder hoist carries tile in small loads and the roofing crew spends longer at it, which shows in the roofing figure.
Our first check is whether the structural sheets carry the roof the architect drew. A tile roof on drawings engineered for a lighter covering changes trusses, headers and possibly footings, so we raise it with the engineer before pricing. If the roofing choice is still open, we price tile and a lighter Class A covering together, framing differences included.
New Construction in other cities
More work in Oak Park
Planning work in Oak Park?
Tell us about the lot and the job. A builder replies by phone or email to set up a visit.