ADU Construction in Temple City, Measured From the Fence
Temple City ADUs placed after measuring the neighboring windows that overlook the yard, with clerestory glass, a shaped roof and skylights where needed.
Windows on neighboring houses that look over a Temple City backyard are the first thing we measure, with a laser meter from the fence line and a note of each sill height. Those readings show which walls of a new unit would face straight into another home, where high clerestory glass serves better than a full window, and how the roof can be shaped so the unit sits quietly beside its neighbors.
Windows placed against the readings
A side wall that faces a close neighbor can take a row of clerestory windows set above eye level, which brings in daylight with no line of sight either way. The bathroom gets obscure glass. Larger windows turn toward the unit's own open ground or toward the garden of the main house. Every bedroom still needs one opening low and large enough for escape, so that window goes on a wall the readings show is open. Near a side or rear line, the fire rules also limit how much glass a wall may hold, which fits the same plan of keeping openings small on that side.
Roof shape, light and review
A shed roof that rises away from the neighbor beside it keeps the wall on that side low and puts the tall wall, with its clerestory windows, toward open yard. Skylights or tubular daylight devices then light the middle of the plan without any wall openings at all. With a neighbor's house uphill on sloping ground, the roof itself is in view, so condensers and vents stay on the ground or low on a wall. The building department serving Temple City reviews the window layout, the height and the setbacks together, and its inspector checks the glass types and the egress opening at the final.
About our adu construction workEverything we build in Temple City
ADU Construction in Temple City: questions
Wherever the setbacks, the sewer fall and the soil allow, with its window walls turned toward open yard. In a Temple City yard with grade, a spot below a neighbor's house looks up at it, while higher ground can see over the fence. We test both against the measured sill heights before drawing.
Yes, for a qualifying single-story unit whose floor stays at 500 square feet or less. For Temple City, the floor plan marks each window by type and the wall sections give sill heights and glass on the sides facing neighbors, which the reviewer reads with the setbacks. Grade engineering and the construction itself get their own quote once we have walked the lot.
Clerestory windows and obscure glass cost more than standard windows, and skylights add flashing and framing. A shed roof with a tall wall adds height to one side of the frame. Taller footings at the downhill edge follow when the ground falls.
ADU Construction in other cities
More work in Temple City
Planning work in Temple City?
Tell us about the lot and the job. A builder replies by phone or email to set up a visit.