Torrance, Los Angeles County

Structural Work, Patio Covers and Decks in Torrance

Second stories, patio covers and decks in Torrance, engineered for the load and filed with city building and safety, run in the same order in nearby cities.

Tell us about the lot and the job

A builder reads it and calls or emails you back. Nothing is booked until you agree to it. How we use your details.

To send, add what you are interested in, your first name and a phone number or an email.

Mesa Rock runs a Torrance job in the same order we use in Lomita, Gardena, Redondo Beach and Rolling Hills Estates: a lot survey, engineering where the load calls for it, plan check, then inspections at each stage. What shifts from one city to the next is the office that reviews the drawings and the format it wants them in. In Torrance that review sits with the city's own building and safety division.

What the Torrance reviewer reads

A deck or addition submittal in Torrance shows setbacks on a site plan, then foundation and framing sheets, plus engineering calculations for beams, posts and any lateral bracing. When corrections come back, each item is answered on revised drawings along with a short response letter. After the permit is issued, an inspector checks the footing trenches and steel before concrete arrives, returns once framing and hardware are in, and signs off at completion. Any planning review tied to the parcel is confirmed by address before the design is locked, since it can change what the drawings must show.

Second floors and patio covers on level ground

On level ground, the structural question is how much the existing foundation can carry. We dig a test pit beside a footing to see its width and depth, then look under the house for anchor bolts holding the sill plate. A second story generally calls for new posts under its main beams, each on its own pad, set in the crawlspace or cut through the slab. A freestanding patio cover gets footings sized to resist wind uplift as well as weight. Where the air stays damp, exposed connectors carry a heavy zinc coating or are stainless, and cut lumber ends are sealed.

Work we take on in Torrance

Each service is planned around the lot, sloped or level.

Cities nearby

Building in Torrance?

Send the address and the job, and a builder will arrange a visit to read the lot.

Ask for a callbackDescribe your lot