Long Beach, Los Angeles County
Decks, Additions and Structural Repair in Long Beach
Decks, additions and structural repairs in Long Beach with stainless or galvanized hardware, sealed flashing and drawings for City of Long Beach plan check.
Air close to open water carries moisture that works on bare steel and unsealed wood all year, and a Long Beach project is planned around that. Every hanger, anchor and fastener that stays exposed is stainless or hot dip galvanized. Ledger boards get flashing that sheds water off the house wall, and cut ends of treated lumber are brushed with preservative before assembly. Those choices are written into the drawings from day one.
Raised decks and patio covers
A deck or patio cover attached to the house hangs on its ledger, so the rim joist behind it is opened and checked for rot first. Posts sit on concrete footings with standoff bases that keep wood off the slab. Where grade falls away behind the house, tall posts receive engineered bracing and deeper footings on the low side. Composite or dense hardwood decking stands up to damp and sun with little upkeep. Guards and stairs are built to the heights and openings the building code sets for each element.
Additions and City of Long Beach review
Room additions and second stories in Long Beach go to the City of Long Beach for plan check, with structural calculations, foundation details and energy forms in the set. Whether a lot falls inside a state review area near the water is confirmed for the address at the start. New footings are tied to the existing foundation with doweled steel when the engineer calls for it. Projects in San Pedro, Lakewood, Lomita and Torrance follow the same drawing, permit and inspection sequence with their own reviewing office.
Work we take on in Long Beach
Each service is planned around the lot, sloped or level.
Building in Long Beach?
Send the address and the job, and a builder will arrange a visit to read the lot.